Near the shutoff valves on the scorching and cold water offer pipes linked to the faucet. (Glimpse for modest, soccer-shaped valve handles below the sink). Eliminate the screw keeping the faucet manage to the faucet entire body, and pull off the manage. Take note: Pay out close awareness to the orientation of all faucet sections, so you can reassemble it in particularly the identical way.
Wrap the jaws of channel-style pliers with tape to reduce scratches, and use the pliers to loosen the cap on the prime of the faucet entire body. Unscrew and eliminate the cap. Meticulously eliminate the faucet sections and arrange them in order as you operate. Lastly, pull the spout from the faucet entire body to expose the diverter valve---a round, plug-like device in the wall of the faucet entire body.
Pull the diverter valve from the entire body making use of needle nose pliers if important. Use white vinegar and a toothbrush to eliminate any deposits from the valve opening and valve sections. If any sections look worn or destroyed, swap them out with exact replacements.
Coat the diverter sections with water- and warmth-evidence grease, and reinstall the valve. Reassemble the faucet in the reverse order of the disassembly.
To change the sprayer hose, disconnect the hose from the faucet it could be screwed onto a nipple or held by a retainer clip. Unscrew the sprayer manage from its base piece, eliminate the little retainer clip at the center of the base, and pull the base from the hose. Install a new hose in the reverse order of the disassembly.
Slowly but surely open the shutoff valves, and take a look at the sprayer and faucet.
Near the shutoff valves on the scorching and cold water offer pipes linked to the faucet. (Glimpse for modest, soccer-shaped valve handles below the sink). Eliminate the screw keeping the faucet manage to the faucet entire body, and pull off the manage. Take note: Pay out close awareness to the orientation of all faucet sections, so you can reassemble it in particularly the identical way.
Wrap the jaws of channel-style pliers with tape to reduce scratches, and use the pliers to loosen the cap on the prime of the faucet entire body. Unscrew and eliminate the cap. Meticulously eliminate the faucet sections and arrange them in order as you operate. Lastly, pull the spout from the faucet entire body to expose the diverter valve---a round, plug-like device in the wall of the faucet entire body.
Pull the diverter valve from the entire body making use of needle nose pliers if important. Use white vinegar and a toothbrush to eliminate any deposits from the valve opening and valve sections. If any sections look worn or destroyed, swap them out with exact replacements.
Coat the diverter sections with water- and warmth-evidence grease, and reinstall the valve. Reassemble the faucet in the reverse order of the disassembly.
To change the sprayer hose, disconnect the hose from the faucet it could be screwed onto a nipple or held by a retainer clip. Unscrew the sprayer manage from its base piece, eliminate the little retainer clip at the center of the base, and pull the base from the hose. Install a new hose in the reverse order of the disassembly.
Slowly but surely open the shutoff valves, and take a look at the sprayer and faucet.
